These choose which measured partials are listed and how they are named. The measurement itself is always made the same way: 170 ms frames, windows of up to 5 s, chosen by the default criteria below.
Note names and cents are relative to 12-tone equal temperament at this A4. A click on the value in the centre of the spiral switches between 440 and 432 Hz.
Only partials at or above this confidence are listed and marked (default 70 %).
Level below the strongest partial in the window (default −60 dB).
Partials heard for less time than this are left out (default 1 s). Off lists every confident partial, however short.
Observe (real time)
These change only the real-time view and its list; measurements are not affected. The list shows partials that have sounded for about ¾ s, within 40 dB of the strongest (less if Weakest partial listed is set lower), and is renewed every second.
Shorter frames follow fast changes; longer frames separate partials that lie close together, especially in the bass, but dim partials whose pitch moves quickly, such as the upper harmonics of a voice with vibrato.
How quickly the display follows the sound. With medium frames a partial shows in full about 80 ms (fast), 100 ms (medium) or 160 ms (steady) after it starts, and is gone about as long after it stops.
Display
Half-width of the strongest lobes on the spiral, in cents. Display only; the measured frequencies are unaffected.
Note names beside the coloured rings, where there is room.
About this copy
Event log: when the page was loaded, hidden and shown again, what happened to the microphone, and every request this app made to the network. It stays on this device.